New Code Sent!
FRENCH DOOR REFRIGERATOR SIZES AND DIMENSIONS: HOW TO MEASURE FOR THE RIGHT FIT
Shopping for a new French door refrigerator entails more than tracking down the most appealing style. The right French door refrigerator for your space offers the capacity and features you need, as well as dimensions that are compatible with your kitchen’s layout and available installation space. This guide breaks down common French door fridge sizes, how to measure your space accurately and how to figure out the capacity that suits your grocery hauls.
COMMON FRENCH DOOR REFRIGERATOR DIMENSIONS
Most French door refrigerator dimensions run about 30 to 36 inches wide, 67 to 70 inches tall and 29 to 35 inches deep. Because these models are built with two side-by-side doors up top and a freezer drawer below, the full-width compartment gives you more room for large items like serving trays or bulk groceries.
SMALLEST FRENCH DOOR REFRIGERATOR SIZES
If your kitchen is tight on space, look toward the compact end of the French door category. Counter-depth models are more shallow than their standard-depth counterparts, typically measuring less than 30 inches deep. These dimensions can help trim your refrigerator’s footprint without sacrificing the desirable two-door layout.
XL FRENCH DOOR REFRIGERATOR SIZES
At the larger end of the size range, XL French door refrigerators, like this 31 cu. ft. Maytag® model, measure around 70 inches high, 36 inches wide and 35 inches deep. Other XL sizes vary by make and model. Larger measurements often translate into extra capacity, but that added footprint also means it’s worth double-checking your install space or cabinet cutout, doorway width and delivery path before you commit to an XL model.
STANDARD-DEPTH VS. COUNTER-DEPTH FRENCH DOOR REFRIGERATORS
Standard-depth French door refrigerators extend a few inches beyond most standard counters and cabinets, while counter-depth models sit nearly flush with your cabinetry. Countertops are typically about 24 to 25 inches deep, so a true counter-depth refrigerator should have a similar depth (not including doors and handles).
To make up for the shallower dimensions, some counter-depth refrigerators are sometimes wider and taller, so be sure to measure your full cutout—not just the depth—before deciding between the two.
FRENCH DOOR REFRIGERATOR SIZE COMPARISON
French door refrigerators are available in sizes suitable to nearly any kitchen layout. Explore the dimension range estimates for compact, standard and XL French door refrigerators below.*
| Size Category | Typical Width | Typical Height | Typical Depth | Best For |
|---|---|---|---|---|
| Compact / counter-depth | ~30-33 in. | 67–70+ in. | Under 30 in. | Apartments, galley kitchens, smaller spaces |
| Standard | ~33-36 in. | 67–70 in. | ~29–35 in. | Most kitchens; this size balances capacity and footprint |
| XL | ~36+ in. | 67–70 in. | ~29–37 in. | Large families, bulk shoppers, frequent entertainers |
*The above dimensions are rough estimates. Actual dimensions vary by models, see the refrigerator’s owner’s manual for more information
An XL French door refrigerator from Maytag® brand can help you handle a full grocery haul without feeling cramped, with the space to match a busy household’s pace. Select Maytag® models feature the XL Crisper with a full-width design to provide maximum drawer storage. Plus, one touch of the PowerCold® feature—found on select Maytag® models—and the refrigerator chills down quickly to help keep everything cool, even if the whole family’s been browsing with the door open.
SHOP MAYTAG® LARGE CAPACITY FRENCH DOOR REFRIGERATORS
STEPS TO MEASURE FOR A FRENCH DOOR REFRIGERATOR
Getting an accurate measurement up-front can save you a headache on delivery day. Work through these five steps in order, from measuring the cutout itself to the path your new fridge will take from your door to its final spot.
1. MEASURE THE OPENING WIDTH AND HEIGHT
Measure the width and height of your intended location or cutout at a few different points, including the top, middle and bottom, and use the narrowest reading as your working number. If a wall sits next to the hinge side, leave about 2½ inches of clearance so the door can swing fully open.
2. MEASURE DEPTH AND NEARBY OBSTRUCTIONS
Measure from the back wall to the edge of your countertop to find your depth. Note anything nearby—like trim, molding or cabinet hardware—that could reduce the usable depth you have to work with.
3. CHECK VENTILATION AND DOOR CLEARANCE
Plan on adding about ½ inch of clearance at the top, sides and back of the refrigerator so air can circulate properly. Check your specific model’s installation instructions for ventilation, door and hinge clearance, since they can vary by model.
4. CONFIRM AISLE AND ISLAND CLEARANCE
Leave about three to four feet between your counters and any island so open doors and drawers don’t block the walkway when someone is trying to get through the kitchen.
5. MEASURE THE COMPLETE DELIVERY PATH
Once you’ve confirmed that your cutout checks out, measure hallways, stairwells, door openings and tight turns along the delivery route from your entrance all the way to the refrigerator’s final spot, so there are no surprises on delivery day.
HOW TO CHOOSE A FRENCH DOOR REFRIGERATOR SIZE
The right size for you comes down to your install location or cabinet cutout, required clearances, kitchen layout and how much fresh and frozen storage your household actually uses from week to week.
BEST FOR NARROW OR GALLEY KITCHENS
In a narrow or galley kitchen, you might want to prioritize a shallower, counter-depth model, since these typically measure less than 30 inches deep and take up less of the walkway. Make sure there’s still enough room for the doors to swing open fully.
BEST FOR KITCHENS WITH AN ISLAND
If your refrigerator sits across from an island, factor in the fridge’s full depth with its doors open and leave about three to four feet of clearance between the counter and the island so the space stays functional. This may be easiest to achieve with a counter-depth model, though it ultimately depends on your kitchen layout.
BEST FOR FAMILIES AND BULK SHOPPING
Larger households may benefit from a French door fridge with large or XL capacity, with about four to six cubic feet per person as a helpful starting point. A family of four might look for around 20 cubic feet, while larger families may want 25+ cubic feet.
French door refrigerators
Keep your food cold and easy to access
Maytag® French door refrigerators offer durable strength and help keep your groceries chilled and organized
BEST FOR A STREAMLINED, BUILT-IN APPEARANCE
If a flush, built-in look matters most to you, a counter-depth French door refrigerator may be worth a look. The trade-off in usable storage compared to a standard-depth model is often minimal, and the shallower depth helps the appliance sit more flush with your countertops, for a sleek, streamlined aesthetic.
FRENCH DOOR REFRIGERATOR DIMENSIONS FAQS
If you have lingering sizing questions specific to your kitchen, explore the answers to common concerns about French door refrigerators below for more information.
Yes, but only slightly. Leveling legs are meant for small height adjustments and to tilt the front of the refrigerator about ⅛- to ¼-inch higher than the back so the doors swing shut on their own, not to make major height adjustments.
If your cutout isn’t quite the right match for your model’s listed height, don’t count on the leveling legs to make up the difference.
It depends. Your delivery service may be able to remove the refrigerator doors to help navigate a tight entryway, but services vary by provider and it also depends on the model of your fridge. If you’re concerned that your delivery route may be too narrow, check with your delivery team in advance to confirm what options are available and what conditions may apply.
No. Packed shipping dimensions are the size of the box (and packaging) that your appliance comes shipped in. Packaging can add extra space beyond the appliance’s listed product dimensions, so it’s worth confirming the dimensions of your new appliance directly with your retailer or the model’s spec sheet.
Never force a refrigerator into an opening that’s too small. You should have about a ½ inch of clearance on all sides of the refrigerator for proper airflow. If your space can’t accommodate your refrigerator with the necessary clearance, consider contacting a professional who may be able to renovate the space, or consider a smaller model.
Maytag® French door refrigerators are built to carry the load of a busy kitchen, with dependable performance and roomy, flexible storage. Find select Maytag® models equipped with the EvenAir™ Cooling System that keeps every item at the ideal temperature, or get to foods fast with a durable, full-width Metal Slide-Out Shelf on select Maytag® refrigerators.
Your subscription was successful
Thank you for signing up. Keep an eye on your inbox for our next newsletter.
Sign Up for More Insights to Stay Connected
Enjoy articles like this? Get helpful guides and appliance care tips sent straight to your inbox.
